Wide Beam 50ft
Open Plan Live-Aboard Project
- Boat REF# · 276520
- LOA · 15.24m
- Year · 2008
- Construction · Steel
- Underwater profile · Full-displacement
- Berths · 4
- Engine · 1 x Diesel 55hp, Isuzu 4 Cylinder (2008)
- Lying · Nr Plymouth, Devon UK (viewings by appointments only)
This boat is off the market but here are some boats that are still For Sale
Extra Details
Designer | Liverpool Boats |
---|---|
Builder | Liverpool Boats |
Lying | Nr Plymouth, Devon UK (viewings by appointments only) |
Fuel capacity | 1,190.0 ltr (261.8 G) Total - 1 Tanks |
Water capacity | 5,000.0 ltr (1,100.0 G) Total - 1 Tanks |
Last survey | 04/09/2012 |
Mechanical
Engine | 1 x Diesel 55hp |
---|---|
Engine make and model | Isuzu 4 Cylinder (2008) |
Engine Hours | Not Recorded |
Engine Cooled | Indirect |
Steering | Tiller |
Drive | Shaft |
Prop(s) | 3 Blade Fixed |
Fuel consumption (approx) | Not Recorded |
Cruising speed (approx) | 8 knots |
Max speed (approx) | 12 knots |
12 Volt Inverter
Dimensions
LOA | 15.24m |
---|---|
Beam | 3.66m |
Draft Min | 1.00m |
Draft Max | 1.00m |
Headroom | 1.83m |
Storage | In water |
Electrical Systems
12 volt battery, 4 batteries charged by: engine, shore power
Construction
Construction | Steel |
---|---|
Underwater profile | Full-displacement |
Finish | Paint finish |
This vessel is suitable for some of the wider UK river and canal systems which we believe includes
the Thames, the Grand Union to Birmingham, the Oxford to Bristol, the rivers Severn and Avon, the Manchester Ship Canal, the Peak Forest and Pennines, the Trent, Mersey, the Norfolk Broads, and the Fenland Drains.
This vessel is also suited to many of the European canals.
Accommodation
Total # of berths | 4 |
---|---|
No. of double berths | 2 |
Cabin(s) | 1 |
Handbasin | 1 |
Shower | 1 |
Heads | 1 heads (Manual) |
Hot water from immersion heater
4 burner gas cooker/stove
Accommodation
Cooker/stove | |
---|---|
Grill | |
Oven | |
Sink | |
Refrigerator | |
Freezer | |
Cabin heating | |
Pressurised water system | |
Hot water system | |
Fresh water wash | |
Non-Smokers | |
Washing Machine |
Hot water from immersion heater
4 burner gas cooker/stove
Deck Gear
Warps | |
---|---|
Fenders | |
Swim Platform | |
Cockpit Enclosure |
3 anchors
(Fishermans, Danforth & Bruce)
8.00m of chain
30.00m of warp
Boat poles x 2
Safety Equipment
1 bilge pumps (0 manual / 1 Electric)
Broker's Comments
This wide beamed steel barge, built by Liverpool Boats, is presently located on a beautiful rural estuary in Cornwall, just a stones throw away from the thriving Ocean City of Plymouth.
Although she could do with a good helping of t.l.c., all the basics are already built in. I believe, an enthusiastic DIY individual could easily complete this project to provide a very comfortable home.
I believe the engine has relatively low hours and appears to be in good condition. I understand that the stern gland and rudder do require some attention though. It would be prudent to have the boat lifted out onto the neighbouring boatyard (literally just around the corner), to have the stern gear checked and serviced.
The photographs show the current open plan layout, but this could easily be changed into a separate sleeping cabin and lounge / diner. There is a well equipped built in kitchen with cooker, fridge, freezer and washing machine, a separate bathroom with shower, sink and toilet and an electric immersion heater is fitted to provide hot / cold water and central heating. A multi fuel stove is also included but could do with some maintenance and checking.
All and all, I think this is an excellent opportunity to purchase a live aboard, with great potential, at a very reasonable price.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.